Mazda 13B-MSP Instalační manuál stáhnout pdf (Strana 15)

2. Install the O2 sensor to the down pipe

adapter and install the adapter to the Turbo

using provided gasket and hardware. Connect

the O2 sensor connector.

(Parts Used #3, 47, 66)

3. Connect the Air Pump hose to the down pipe

adapter. Bend the hose so that it will not

contact the turbine housing. Re-use the stock

gasket.

(Parts Used #63)

4. Secure the Down Pipe Adapter to the

transmission with the provided bracket.

(Parts Used #20)

5. Reinstall the Catalytic converter, exhaust

system, and the cross member in the order

they were removed using the factory gaskets.

6. Reinstall the transverse member.

7. Cover the Air pump hose with provided wire

loom and connect the hose for the AIR control

valve.

(Parts Used #53, 56)

8. Connect the AIR control valve hose and the

connector.

1 2 ... 10 11 12 13 14 15 16 17 18

Komentáře k této Příručce

Žádné komentáře